2U Fiber Patch Panel With 48 Ports
Fixed Type, Rack Mounted, Indoor Application
- Model: FPP-GPZJJSC48
- Colour: Black
- Height can be 1U, 2U, 3U
- 4 cable entry ports with grommets in the rear of the unit
- Adapter panel and splice tray can vary as request
- Free sample is available
The rack mount enclosure is securely can house 2 pre-terminated adapter panels in the 2u configuration. It features front and rear doors for easy access and provides an optical interconnect between the ether net switch, router, or OSP cable and the building cabling system. It is of unique structure, reasonable layout, and adequate room for splicing and surplus fibers storage; and the 2U patch panel on the front is available to be equipped with SC, LC, ST,FC fiber adapters .
This 2U rack mount shelf that supports 48 or 96 fiber counts terminal, it is excellent for fiber patching and splicing management and can also work as a protective device to protect fiber optic connections from damage. The patch panel is applicable in the branch connection of optical cable terminal and usually installed on the 19″ or 23″ framework.
. The body is made of high quality cold-rolled steel, and electrostatic spraying in the surface
. Configure with cable fixed device, splice tray and thread ring
. Stacked splice tray is convenient for future capacity expansion
. Independent insulation grounding device provides the safety.
. Internal splice tray is made of high strength engineering plastics.
. Inlets and outlets are sealed with oil resistant nitrile rubber
. Fiber radius curvature：≥40mm
. Splice tray additional loss：fiber in the tray has no additional loss
. Fiber length coiled in the tray：≥1.6m
. Working temperature：-40℃～+ 60℃
. Lateral pressure resistance: 500N
. Impact resistance: 750N
|Suitable adapters||SC, ST, FC, LC|
|Connector capacity||48 or 96|
|Max fiber splice capacity||48 (single core) or 96(dual core)|
|Application||FTTH, LAN,WAN,CATV etc|
|Lead Time||5 days for 100pcs, 10 days for 800pcs|