How to Connect Fiber Optic Cable To Patch Panel

Fiber patch panel is a piece of equipment for cables to achieve better cable management. If using a simple word to describe, It works like a telephone switchboard. As you know, it can connect fiber optic cable and other communication devices. As for how to connect fiber optic cable to patch panel, see the following instruction.

The steps of  connecting fiber optic cable to patch panel:

1.A fiber optic patch panel should be prepared first and make sure this work will be done on a clean and level work surface. Patch panel is supplied empty, so the adapters should be inserted into the mounting plate. Then fix the mounting plate in position.

2.Prepare cables based on standard termination procedures and ensure there is enough surplus cable to work with. Connect the cable by fixing the gland and roll the excess fiber onto the spool. After that, remove the protective cap and insert it into position in the adapter. Once the cables are all attached, it’s better to use a zip tie to secure the cables in a bundle.

3.Label each jack location on the fiber distribution panel so as to distinguish the cables. Finally, mount the patch panel in a rack or cabinet.

If you are using a fiber patch panel, this means it’s easier to alter the bond between products. Just about all you must do is actually alter that outlet the actual area solar panel provides you with a simpler user interface for controlling cable connections.